Quality Stage Rental LED Display & Outdoor Rental LED Display Manufacturer
Contact Us

Contact Person : mark

Phone Number : 18688716899

WhatsApp : +8618688716899

latest news about how to solve black led screen problem?

September 23, 2021

latest news about how to solve black led screen problem?
latest news about how to solve black led screen problem?

how to solve the black led screen problem?

 

There are many types of problems for LED display products, today we will analyze the common type: black screen. It means the whole screen is showing nothing.

 

how to solve black led screen problem?

 

 

Step 1, check the power of the screen. Go to the back of the screen, and then check if the power of the screen is on or not. You could check the receiving card of the panel, if there is no power, all of the receiving cards will stop working, and the lights on the receiving cards will stop blinking as well. If the power is all right, then go to step 2.

 

Step 2. Check the setting of the display mode of the screen. Normally we will use synchronous system controller. For this type, the computer needs to be clone mode or duplicate mode. So go to the display setting of the computer(or graphics card setting), check if the setting is clone mode or duplicate mode. If the setting is right, then go to step 3.

 

Step3. Check the DVI cable. Unplug the DVI cable and then plug it back. If still not working, then replace it with a new cable and try. Please be noted: When you unplug or plug the cable, make sure the power of the controller is off.

 

Step4. Check the signal cable CAT5 or CAT6 from the controller to the screen. If there is no connection problem, try to replace the cable with a new one because sometimes the CAT5 or CAT6 cable gets the problem as well.

 

Step5. Use the CAT5 or CAT6 cable to connect a different panel from the screen side. The reason we try this is that if the receiving card of the first panel has a problem, it can not pass the signal to the next panel. So when you use the network cable to connect the other panel instead of the first one, we could find out if the first one has a problem or not.

 

Step6. Check the power of the controller. The controller has the power switch. If the light of the controller is off, it means there is no power of the controller or the controller is broken. So check the power switch button and also check the power cable. Meanwhile, replace the controller and try if you have the backup one.

 

Premteco not only has high quality LED display products but also has good service. Customer satisfaction is our culture. We are happy to assist clients at any time.

 

Any other problem can feel free to ask me by email or there. joyce.qiao@hjyled.com

Get in touch with us

Enter Your Message